Propellerhead ReCycle Spezifikationen PDF herunterladen (Seite 12)

MACINTOSH INSTALLATION

Requirements

To use ReCycle for Macintosh you need the following:

• Any Power Macintosh with a CD-ROM drive and 16-bit audio.

• 16 MB of RAM or more.

• System 8.6 or later.

For communication with your specific sampler, you might also need:

•A MIDI interface and cables, and/or...

•A SCSI interface and SCSI cables.

For SCSI communication, your computer must use SCSI Manager 4.3 (see

page 13).

Setting Up The Computer

Before proceeding, your computer should be set up and you should be reason-

ably familiar with its operation. You should also install all peripherals, such as a

MIDI interface etc.

Turning on your system

1. If you have any peripherals connected to the computer or sampler,

always turn these on first.

2. If you are using a sampler with the operating system on a floppy

disk or hard disk, make sure the operating system is loaded before

you turn on your computer.

3. Turn on the computer.

It should come alive, showing the desktop after a while. If it doesn’t, check

your SCSI setup.

4. Make sure Virtual Memory is Off, in the Memory Control Panel.

This is necessary for trouble-free audio playback. If Virtual Memory is On,

turn it off and restart the computer.

Finding your way on the

ReCycle CD-ROM

Once you have turned on your system, insert the ReCycle CD-ROM and open it

in the Finder. At the root of the CD-ROM, you will find a file called “Read Me”.

Double click this to get information about what is what on the CD-ROM.

Installing the Acrobat

Reader

To be able to read the online documentation, you must have the Acrobat Reader

application installed. If this isn’t already installed on your computer, you need to

install it from the ReCycle CD-ROM:

1. On the ReCycle CD-ROM, open the folder “Acrobat Reader” and

double click on the file “Reader Installer”.

2. Follow the instructions in the dialogs that appear.

3. At the end of the installation you may be required to restart your

computer again. Do so.

Installing ReCycle

1. On the CD-ROM, double click the icon named “Install ReCycle 2.0”.

2. Use the options in the dialog to select a destination and follow the

instructions on screen.

3. Click the “Install” button.

4. At the end of the installation you may be required to restart your

computer. Do so.

Don’t launch ReCycle yet! You need to perform some additional

steps first:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Propellerhead ReCycle Spezifikationen Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Propellerhead ReCycle