Propellerhead ReCycle Spezifikationen PDF herunterladen (Seite 72)

TRANSMIT AND SAMPLER OPTIONS

Selecting a Sampler to

Transmit to

To route the Receive and Transmit functions to a particular sampler, select it

from lower section of the Sampler menu. If your sampler is not on the menu you

must add it in the Sampler Settings dialog, see page 30.

! For file-based samplers such as SampleCell and for the Akai

S5000/6000 sampler series you do not use the Transmit dialog, but

the Export dialog on the File menu. See the Sampler and File Refer-

ence pdf manual for details.

An Akai S3000 selected.

You can have several samplers connected, either of different types or of the

same type, but only one at a time can be selected.

You can switch samplers while you are working with the program, which allows

you for example to Receive a sound from one sampler and Transmit it to another.

Transmit and Memory

The program needs free memory in the computer for Transmitting. In a worst

case scenario (with Stretch set to 100%) it needs twice the memory of the long-

est slice. This means that if you have “Transmit As One Sample” turned on and

use high Stretch factors, you need to make sure you have enough memory left

when you Transmit.

For more information, see page 14 (MacOS only) and page 36.

Transmit Options

On the Process menu, you will find two Transmit settings (or “options”); ”Trans-

mit as One Sample” and “Silence Selected”. These options can also be toggled

on or off using the two Transmit Option buttons on the Toolbar:

Transmit as One Sample has no effect on playback in ReCycle. Si-

lence Selected, however, can be auditioned in Preview mode.

Each document has its own settings.

If you are working with a lot of windows, be sure to check that the settings

are correct before you Transmit. The settings are also saved to disk with the

file when you Save.

Transmit as One Sample

Deactivated

When Transmit As One Sample is turned off, the audio gets sliced into individ-

ual samples when transmitted, and the MIDI files created will contain one note

for each of those slices.

! This is the preferred mode if you want to use your MIDI sequencer

to edit the loop, change its tempo or use the MIDI file as a groove.

Activated

When Transmit As One Sample is turned on, the program will transmit the part

that stretches from the Left Locator to the Right as one sample. Also, in this

mode, the MIDI File will only consist of one event, with the length set using the

Bars and Beats settings.

When should Transmit as one Sample be Activated?

One obvious application of transmitting as one sample (as opposed to separate

slices) is when you simply want to change the properties (like pitch and/or

tempo) of an audio file without otherwise changing it. Say you have an audio file

(Wave, Aiff etc.) that you wish to use in a song. The problem is that the tempo

and/or the pitch of the file is wrong for the song, and you wish to fix this. The so-

Transmit as One Sample Silence Selected

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Propellerhead ReCycle Spezifikationen Seite 72

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Propellerhead ReCycle