
MENU AND DIALOG REFERENCE
174
Export Song/Loop as Audio File...
When you have created a complete song, you may want to mix it down to an
audio file to make it playable for other people (who don’t use Reason). You
can either export the whole song (from the start to the “E” marker), or only
the loop (the area between the left and right locator in the sequencer). Pro-
ceed as follows:
1. Make sure only the main stereo outputs are used.
The export function will only include audio routed to the stereo outputs.
2. Make sure the Loop/End markers are at the correct positions.
If you want to export the loop, you need to set the left and right locators to
encompass the desired area. If you instead want to export the whole
song, make sure the End (E) marker is at the desired end position.
✪ If you are using reverb or delay, you may want to adjust the right lo-
cator or End marker so that the reverb/delay “tails” are included in
the exported file.
3. Check that the song (or loop) plays back properly.
It’s especially important that no clipping occurs during playback (see
page 74).
4. Pull down the file menu and select Export Song as Audio File (or Ex-
port Loop as Audio File).
A file dialog appears.
5. Specify a name, location and file type (AIFF or Wave) for the audio
file, and click Save.
6. Specify a sample rate and bit depth (resolution) for the exported file
in the Settings dialog that appears.
7. Click OK.
The program creates the audio file. Depending on the length of the song/
loop, this may take a while, during which a progress dialog is shown.
Export REX as MIDI File...
If you have imported a REX file into a Dr. Rex device and wish to play back
the loop via MIDI (typically from another sequencer), proceed as follows:
1. Select the Dr. Rex device in the rack.
2. Select “Export REX as MIDI File...” from the File menu.
3. Save the MIDI File to disk.
4. In the other application, open the MIDI file you just created.
5. Set up the other application to play back the MIDI File on the correct
MIDI Output and MIDI Channel (the output and channel on which the
Dr. Rex device receives data).
Quit
This allows you to quit the program. If there are any documents open with un-
saved changes you will be asked whether you want to save those changes.
Kommentare zu diesen Handbüchern