Propellerhead Reason - 1.0.1 Betriebshandbuch PDF herunterladen (Seite 49)

USING REASON AS A REWIRE SLAVE

Still, you should be aware that running two powerful audio applications on

one computer will require a fast processor and most of all a healthy amount

of RAM.

Preparations for Using

ReWire - Macintosh only

When you use ReWire, some of the system resources normally occupied by

Reason are “transferred” to the other audio application: More specifically, the

RAM required for loading samples in Reason, must now be provided by host

application instead. Therefore, when using ReWire we recommend you to

make the following changes to your memory settings for the two programs

(for details, see your Macintosh manual):

1. If you have raised the maximum memory setting in Reason (to be

able to use more samples) lower it back to the recommended value,

but make a mental note of how much it was set to.

2. Raise the Maximum memory for the host application by at least the

amount that you just lowered for Reason.

Launching and Quitting

When using Rewire, the launch and quit order is very important:

Launching for normal use with ReWire

1. First launch the host application.

2. Then launch Reason.

Quitting a ReWire session

When you are finished, you also need to Quit the applications in a special or-

der:

1. First quit Reason.

2. Then quit the host application.

Launching the host application for use without Reason/

ReWire

If you don’t plan to run Reason, just launch the host application as usual. We

recommend that you then also deactivate all ReWire channels if required

(see the relevant section for your program, below). But this is not completely

critical, ReWire does not use up very much processing power when it isn’t

used.

Launching Reason for use without the host application

If you want to use Reason as it is, without ReWire, just launch it as you nor-

mally do.

Launching both programs without using ReWire

We don’t know exactly why you would want to run Reason and a Rewire host

application at the same time on the same computer, without using ReWire,

but you can:

1. First launch Reason.

2. Then launch the host application.

You may get a warning message in the host application, regarding ReWire,

but you can safely ignore it. Please also note that the two programs now

compete for system resources such as audio cards, just as when running ei-

ther with other, non-ReWire, audio applications.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 206 207

Kommentare zu diesen Handbüchern

Keine Kommentare

Propellerhead Reason - 1.0.1 Betriebshandbuch Seite 49

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Propellerhead Reason - 1.0.1