Propellerhead Reason - 1.0.1 Betriebshandbuch PDF herunterladen (Seite 38)

ROUTING AUDIO AND CV

Bypassing Auto-Routing

➜ If you wish to create a new device, without any auto-routing taking

place, press [Shift] when creating the device.

Manual Routing

By selecting “Toggle Rack Front/Rear” from the Options menu or pressing

[Tab] you turn the rack around. On the back of each device you will find con-

nectors of two different types: audio and CV. As mentioned before, audio in-

puts and outputs are shown as large “quarter inch” jacks, while CV input and

output jacks are smaller.

There are two ways to route audio from one device to another:

• By connecting “virtual patch cables” between inputs and outputs.

• By selecting connections from a pop-up menu.

Using Cables

! For the cables to be visible, the option “Show Cables” must be acti-

vated on the Options menu. See below.

1. Click on the desired input or output jack on one of the devices, and

drag the pointer away from the jack (with the mouse button

pressed).

A loose cable appears.

2. Drag the cable to the jack on the other device.

When you move the cable end over a jack of the correct type (audio/CV,

input/output) it will be highlighted to show that a connection is possible.

3. Release the mouse button.

The cable is connected. If both input and output are in stereo and you

connect the left channels, a cable for the right channel is automatically

added.

➜ You can change an existing connection in the same way, by clicking

on one end of the cable and dragging it to another connector.

Using pop-up menus

1. Click (or right-click) on a connector.

A pop-up menu appears, listing all devices in the rack.

2. Move the pointer to the desired device (the device to which you

want to create a connection).

A submenu appears, listing all suitable input/output connections. For ex-

ample, if you clicked on an audio output on a device, the hierarchical sub-

menus will list all audio inputs in all other devices.

➜ If a device is greyed out on the pop-up menu, there are no connec-

tions of the suitable kind.

3. Select the desired connector from the submenu.

The connection is created.

Disconnecting Devices

Again, there are two ways to disconnect devices:

➜ Click on one end of the cable, drag it away from the jack and drop it

anywhere away from a jack.

➜ Click on one of the connectors and select “Disconnect” from the

context menu that appears.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 206 207

Kommentare zu diesen Handbüchern

Keine Kommentare

Propellerhead Reason - 1.0.1 Betriebshandbuch Seite 38

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Propellerhead Reason - 1.0.1